Ravichandran, Guruswami

Article from CaltechAUTHORS

• Monfared, Siavash and Ravichandran, Guruswami (Ravi), et el. (2024) Short-range correlation of stress chains near solid-to-liquid transition in active monolayers; Journal of The Royal Society Interface; Vol. 21; No. 214; 20240022; PMCID PMC11077009; 10.1098/rsif.2024.0022
• Gandhi, Vatsa and Ravindran, Suraj, et el. (2023) Real-time characterization of dislocation slip and twinning of shock-compressed molybdenum single crystals; Physical Review Materials; Vol. 7; No. 7; 073601; 10.1103/physrevmaterials.7.073601
• Ravindran, Suraj and Gandhi, Vatsa, et el. (2023) Mesoscale shock structure in particulate composites; Journal of the Mechanics and Physics of Solids; Vol. 174; Art. No. 105239; 10.1016/j.jmps.2023.105239
• Monfared, Siavash and Ravichandran, Guruswami, et el. (2023) Mechanical basis and topological routes to cell elimination; eLife; Vol. 12; Art. No. e82435; PMCID PMC10112887; 10.7554/elife.82435
• Ravindran, Suraj and Gandhi, Vatsa, et el. (2023) Three-dimensional full-field velocity measurements in shock compression experiments using stereo digital image correlation; Review of Scientific Instruments; Vol. 94; No. 2; Art. No. 025107; 10.1063/5.0131590
• Weeks, J. S. and Ravichandran, G. (2023) Effect of Topology on Transient Dynamic and Shock Response of Polymeric Lattice Structures; Journal of Dynamic Behavior of Materials; 10.1007/s40870-022-00359-2
• Weeks, John S. and Gandhi, Vatsa, et el. (2022) Shock compression behavior of stainless steel 316L octet-truss lattice structures; International Journal of Impact Engineering; Vol. 169; Art. No. 104324; 10.1016/j.ijimpeng.2022.104324
• Andrade, J. E. and Gu, Z., et el. (2022) Measuring Terzaghi's effective stress by decoding force transmission in fluid-saturated granular media; Journal of the Mechanics and Physics of Solids; Vol. 165; Art. No. 104912; 10.1016/j.jmps.2022.104912
• Joshi, Akshay and Gandhi, Vatsa, et el. (2022) An investigation of shock-induced phase transition in soda-lime glass; Journal of Applied Physics; Vol. 131; No. 20; Art. No. 205902; 10.1063/5.0086627
• Weeks, John S. and Ravichandran, Guruswami (2022) High strain-rate compression behavior of polymeric rod and plate Kelvin lattice structures; Mechanics of Materials; Vol. 166; Art. No. 104216; 10.1016/j.mechmat.2022.104216
• Kettenbeil, C. and Lovinger, Z., et el. (2022) Inelastic behavior of tungsten carbide at high pressures; Journal of the Mechanics and Physics of Solids; Vol. 159; Art. No. 104762; 10.1016/j.jmps.2021.104762
• Ginsberg, Leah and McDonald, Robin, et el. (2022) Cell wall and cytoskeletal contributions in single cell biomechanics of Nicotiana tabacum; Quantitative Plant Biology; Vol. 3; e1; PMCID PMC10097588; 10.1017/qpb.2021.15
• Gandhi, Vatsa and Ravindran, Suraj, et el. (2022) Dynamic Strength of Iron at High Pressures and Strain Rates; Physical Review Letters; Vol. 128; No. 1; Art. No. 015705; 10.1103/physrevlett.128.015705
• Lovinger, Z. and Czarnota, C., et el. (2021) The role of micro-inertia on the shock structure in porous metals; Journal of the Mechanics and Physics of Solids; Vol. 154; Art. No. 104508; 10.1016/j.jmps.2021.104508
• Oniyama, Tomoyuki and Gupta, Yogendra M., et el. (2021) Peak states of molybdenum single crystals shock compressed to high stresses; Journal of Applied Physics; Vol. 129; No. 24; Art. No. 245906; 10.1063/5.0054395
• Ravindran, Suraj and Gandhi, Vatsa, et el. (2021) Dynamic Strength of Copper at High Pressures Using Pressure Shear Plate Experiments; Journal of Dynamic Behavior of Materials; Vol. 7; No. 2; 248-261; 10.1007/s40870-020-00287-z
• Joshi, Akshay and Ravindran, Suraj, et el. (2021) Probing the properties and mechanisms of failure waves in soda-lime glass; Journal of Applied Physics; Vol. 129; No. 18; Art. No. 185902; 10.1063/5.0047950
• Grekas, Georgios and Proestaki, Maria, et el. (2021) Cells exploit a phase transition to mechanically remodel the fibrous extracellular matrix; Journal of the Royal Society Interface; Vol. 18; No. 175; Art. No. 20200823; 10.1098/rsif.2020.0823
• Brodnik, N. R. and Brach, S., et el. (2021) Fracture Diodes: Directional Asymmetry of Fracture Toughness; Physical Review Letters; Vol. 126; No. 2; Art. No. 025503; 10.1103/physrevlett.126.025503
• Roumeli, Eleftheria and Ginsberg, Leah, et el. (2020) Structure and Biomechanics during Xylem Vessel Transdifferentiation in Arabidopsis thaliana; Plants; Vol. 9; No. 12; Art. No. 1715; PMCID PMC7762020; 10.3390/plants9121715
• Kettenbeil, C. and Lovinger, Z., et el. (2020) Pressure-Shear Plate Impact Experiments at High Pressures; Journal of Dynamic Behavior of Materials; Vol. 6; No. 4; 489-501; 10.1007/s40870-020-00250-y
• Ravindran, Suraj and Lovinger, Zev, et el. (2020) Strength of magnesium at high pressures and strain rates; Extreme Mechanics Letters; Vol. 41; Art. No. 101044; 10.1016/j.eml.2020.101044
• Oniyama, Tomoyuki and Gupta, Yogendra M., et el. (2020) Shock compression of molybdenum single crystals to 110 GPa: Elastic–plastic deformation and crystal anisotropy; Journal of Applied Physics; Vol. 127; No. 20; Art. No. 205902; 10.1063/5.0006559
• Zhang, Zhiwen and Rosakis, Phoebus, et el. (2020) A Minimal Mechanosensing Model Predicts Keratocyte Evolution on Flexible Substrates; Journal of the Royal Society Interface; Vol. 17; No. 166; Art. No. 20200175; PMCID PMC7276546; 10.1098/rsif.2020.0175
• Mac Donald, Kimberley Ann and Ravichandran, Guruswami (2020) Crack propagation and renucleation in soft brittle hydrogels; International Journal of Fracture; Vol. 222; 37-52; 10.1007/s10704-020-00430-w
• Brodnik, Neal R. and Hsueh, Chun-Jen, et el. (2020) Guiding and Trapping Cracks With Compliant Inclusions for Enhancing Toughness of Brittle Composite Materials; Journal of Applied Mechanics; Vol. 87; No. 3; Art. No. 031018; 10.1115/1.4045682
• Rauls, M. B. and Ravichandran, G. (2020) Structure of shock waves in particulate composites; Journal of Applied Physics; Vol. 127; No. 6; Art. No. 065902; 10.1063/1.5125449
• Mac Donald, K. and Ravichandran, G. (2019) Confocal Microscopy and Digital Volume Correlation Methods for Intergranular Force Transmission Experiments; Experimental Techniques; Vol. 43; No. 4; 457-468; 10.1007/s40799-018-0292-8
• Avellar, L. and Reese, T., et el. (2018) Effect of Cohesive Zone Size on Peeling of Heterogeneous Adhesive Tape; Journal of Applied Mechanics; Vol. 85; No. 12; Art. No. 121005; 10.1115/1.4041224
• Sternberger, Z. and Opachich, Y., et el. (2018) Investigation of hydrodynamic instability growth in copper; International Journal of Mechanical Sciences; Vol. 149; 475-480; 10.1016/j.ijmecsci.2017.08.051
• Ravichandran, G. and Gao, Huajian, et el. (2018) Preface – Ares J. Rosakis; Journal of the Mechanics and Physics of Solids; Vol. 120; 1-4; 10.1016/j.jmps.2018.07.004
• Hsueh, C.-J. and Avellar, L., et el. (2018) Stress fluctuation, crack renucleation and toughening in layered materials; Journal of the Mechanics and Physics of Solids; Vol. 120; 68-78; 10.1016/j.jmps.2018.04.011
• Randall, Greg C. and Dahal, Jinesh, et el. (2018) Microcoining ripples in metal foils; International Journal of Mechanical Sciences; Vol. 148; 263-271; 10.1016/j.ijmecsci.2018.08.034
• Stebner, Aaron P. and Wehrenberg, Christopher, et el. (2018) Strength of tantalum shocked at ultrahigh pressures; Materials Science and Engineering A; Vol. 732; 220-227; 10.1016/j.msea.2018.06.105
• Kettenbeil, Christian and Mello, Michael, et el. (2018) Heterodyne transverse velocimetry for pressure-shear plate impact experiments; Journal of Applied Physics; Vol. 123; No. 12; Art. No. 125902; 10.1063/1.5023007
• Kettenbeil, Christian and Ravichandran, Guruswami (2018) Experimental investigation of the dynamic behavior of metaconcrete; International Journal of Impact Engineering; Vol. 111; 199-207; 10.1016/j.ijimpeng.2017.09.017
• Ghosh, Dipankar and Kingstedt, Owen T., et el. (2017) Plastic Work to Heat Conversion During High-Strain Rate Deformation of Mg and Mg Alloy; Metallurgical and Materials Transactions A; Vol. 48; No. 1; 14-19; 10.1007/s11661-016-3825-8
• Hurley, R. C. and Lim, K. W., et el. (2016) Dynamic Inter-Particle Force Inference in Granular Materials: Method and Application; Experimental Mechanics; Vol. 56; No. 2; 217-229; 10.1007/s11340-015-0063-8
• Ghosh, Dipankar and Bah, Abubakarr, et el. (2016) An experimental investigation of domain wall motion in polycrystalline Ni during high-rate compressive loading; Smart Materials and Structures; Vol. 25; No. 1; Art. No. 01LT03; 10.1088/0964-1726/25/1/01LT03
• Rosakis, Phoebus and Notbohm, Jacob, et el. (2015) A model for compression-weakening materials and the elastic fields due to contractile cells; Journal of the Mechanics and Physics of Solids; Vol. 85; 16-32; 10.1016/j.jmps.2015.08.013
• Bodelot, Laurence and Escobedo-Diaz, Juan P., et el. (2015) Microstructural changes and in-situ observation of localization in OFHC copper under dynamic loading; International Journal of Plasticity; Vol. 74; 58-74; 10.1016/j.ijplas.2015.06.002
• Notbohm, Jacob and Lesman, Ayelet, et el. (2015) Quantifying cell-induced matrix deformation in three dimensions based on imaging matrix fibers; Integrative Biology; Vol. 7; No. 10; 1186-1195; 10.1039/c5ib00013k
• Xia, S. M. and Ponson, L., et el. (2015) Adhesion of heterogeneous thin films II: Adhesive heterogeneity; Journal of the Mechanics and Physics of Solids; Vol. 83; 88-103; 10.1016/j.jmps.2015.06.010
• Notbohm, Jacob and Lesman, Ayelet, et el. (2015) Microbuckling of fibrin provides a mechanism for cell mechanosensing; Journal of the Royal Society Interface; Vol. 12; No. 108; Art. No. 20150320; PMCID PMC4528600; 10.1098/rsif.2015.0320
• Sadjadpour, Amir and Rittel, Daniel, et el. (2015) A model coupling plasticity and phase transformation with application to dynamic shear deformation of iron; Mechanics of Materials; Vol. 80; No. Part B; 255-263; 10.1016/j.mechmat.2014.04.010
• Pan, Z. and Xia, S., et el. (2015) Diffraction-Assisted Image Correlation for Three-Dimensional Surface Profiling; Experimental Mechanics; Vol. 55; No. 1; 155-165; 10.1007/s11340-014-9918-7
• Rauls, Michael B. and Ravichandran, Guruswami (2015) Shock Wave Structure in Particulate Composites; Procedia Engineering; Vol. 103; 515-521; 10.1016/j.proeng.2015.04.067
• Brown, J. L. and Ravichandran, G. (2014) Analysis of oblique shock waves in solids using shock polars; Shock Waves; Vol. 24; No. 4; 403-413; 10.1007/s00193-013-0484-1
• Lesman, Ayelet and Notbohm, Jacob, et el. (2014) Contractile forces regulate cell division in three-dimensional environments; Journal of Cell Biology; Vol. 205; No. 2; 155-162; PMCID PMC4003238; 10.1083/jcb.201309029
• Kovalchik, Christopher and Molinari, Alain, et el. (2014) Rate Dependent Adhesion Energy and Nonsteady Peeling of Inextensible Tapes; Journal of Applied Mechanics; Vol. 81; No. 4; Art. No. 041016; 10.1115/1.4025273
• Bodelot, Laurence and Ravichandran, Guruswami (2014) Experimental determination of a representative texture and insight into the range of significant neighboring grain interactions via orientation and misorientation statistics; International Journal of Materials Research; Vol. 105; No. 2; 117-129; 10.3139/146.111007
• Hurley, Ryan and Marteau, Eloïse, et el. (2014) Extracting inter-particle forces in opaque granular materials: Beyond photoelasticity; Journal of the Mechanics and Physics of Solids; Vol. 63; 154-166; 10.1016/j.jmps.2013.09.013
• Kovalchick, C. and Molinari, A., et el. (2013) An experimental investigation of the stability of peeling for adhesive tapes; Mechanics of Materials; Vol. 66; 69-78; 10.1016/j.mechmat.2013.07.012
• Notbohm, J. and Rosakis, A., et el. (2013) Three-dimensional Displacement and Shape Measurement with a Diffraction-assisted Grid Method; Strain: An International Journal for Experimental Mechanics; Vol. 49; No. 5; 399-408; 10.1111/str.12046
• Molinari, Alain and Ravichandran, Guruswami (2013) Stability of peeling for systems with rate independent decohesion energy; International Journal of Solids and Structures; Vol. 50; No. 11-12; 1974-1980; 10.1016/j.ijsolstr.2013.02.017
• Xia, S. and Gdoutou, A., et el. (2013) Diffraction Assisted Image Correlation: A Novel Method for Measuring Three-Dimensional Deformation using Two-Dimensional Digital Image Correlation; Experimental Mechanics; Vol. 53; No. 5; 755-765; 10.1007/s11340-012-9687-0
• Xia, S. M. and Ponson, L., et el. (2013) Adhesion of heterogeneous thin films—I: Elastic heterogeneity; Journal of the Mechanics and Physics of Solids; Vol. 61; No. 3; 838-851; 10.1016/j.jmps.2012.10.014
• Kidd, T. H. and Ravichandran, G., et el. (2012) In situ mechanical characterization during deformation of PVC polymeric foams using ultrasonics and digital image correlation; Mechanics of Materials; Vol. 55; 82-88; 10.1016/j.mechmat.2012.08.001
• Alkhader, M. and Knauss, W. G., et el. (2012) A New Shear-Compression Test for Determining the Pressure Influence on the Shear Response of Elastomers; Experimental Mechanics; Vol. 52; No. 8; 1151-1161; 10.1007/s11340-011-9572-2
• Salem, H. G. and Lee, William M., et el. (2012) Quasi-Static and High-Strain-Rate Experimental Microstructural Investigation of a High-Strength Aluminum Alloy; Metallurgical and Material Transactions A; Vol. 43A; No. 6; 1895-1901; 10.1007/s11661-011-1064-6
• Xia, S. and Ponson, L., et el. (2012) Toughening and Asymmetry in Peeling of Heterogeneous Adhesives; Physical Review Letters; Vol. 108; No. 19; Art. No. 196101; 10.1103/PhysRevLett.108.196101
• Kidane, A. and Lashgari, A., et el. (2012) Rigorous model-based uncertainty quantification with application to terminal ballistics, part I: Systems with controllable inputs and small scatter; Journal of the Mechanics and Physics of Solids; Vol. 60; No. 5; 983-1001; 10.1016/j.jmps.2011.12.001
• Rittel, D. and Kidane, A. A., et el. (2012) On the dynamically stored energy of cold work in pure single crystal and polycrystalline copper; Acta Materialia; Vol. 60; No. 9; 3719-3728; 10.1016/j.actamat.2012.03.029
• Li, B. and Kidane, A., et el. (2012) Verification and validation of the Optimal Transportation Meshfree (OTM) simulation of terminal ballistics; International Journal of Impact Engineering; Vol. 42; 25-36; 10.1016/j.ijimpeng.2011.11.003
• Notbohm, J. and Kim, J.-H., et el. (2012) Three-Dimensional Analysis of the Effect of Epidermal Growth Factor on Cell-Cell Adhesion in Epithelial Cell Clusters; Biophysical Journal; Vol. 102; No. 6; 1323-1330; 10.1016/j.bpj.2012.02.016
• Notbohm, Jacob and Poon, Benny, et el. (2012) Analysis of nanoindentation of soft materials with an atomic force microscope; Journal of Materials Research; Vol. 27; No. 1; 229-237; 10.1557/jmr.2011.252
• Ravichandran, G. and Rajapakse, Y. D. S. (2012) Sandwich Structures; Experimental Mechanics; Vol. 52; No. 1; 1-2; 10.1007/s11340-011-9580-2
• Silva, M. L. and Ravichandran, G. (2012) Stress Field Evolution under Mechanically Simulated Hull Slamming Conditions; Experimental Mechanics; Vol. 52; No. 1; 107-116; 10.1007/s11340-011-9529-5
• Silva, M. L. and Ravichandran, G. (2011) Combined thermoelastic stress analysis and digital image correlation with a single infrared camera; Journal of Strain Analysis for Engineering Design; Vol. 46; No. 8; 783-793; 10.1177/0309324711418286
• Poon, B. and Ponson, L., et el. (2011) Damage accumulation and hysteretic behavior of MAX phase materials; Journal of the Mechanics and Physics of Solids; Vol. 59; No. 10; 2238-2257; 10.1016/j.jmps.2011.03.012
• Notbohm, J. and Kim, J.-H., et el. (2011) Three-dimensional traction force microscopy for studying cellular interactions with biomaterials; Procedia IUTAM; Vol. 4; 144-150; 10.1016/j.piutam.2012.05.016
• Brown, J. L. and Ravichandran, G., et el. (2011) High pressure Hugoniot measurements using converging shocks; Journal of Applied Physics; Vol. 109; No. 9; Art. No. 093520; 10.1063/1.3590140
• Franck, Christian and Maskarinec, Stacey A., et el. (2011) Three-Dimensional Traction Force Microscopy: A New Tool for Quantifying Cell-Matrix Interactions; PLoS ONE; Vol. 6; No. 3; Art. No. e17833; PMCID PMC3066163; 10.1371/journal.pone.0017833
• Gu, Y. B. and Zhuang, S., et el. (2010) Upstream jetting phenomenon in planar shock wave experiments with ceramic powders; Shock Waves; Vol. 20; No. 5; 387-393; 10.1007/s00193-010-0268-9
• Kwon, H. J. and Rogalsky, Allan D., et el. (2010) Application of Digital Image Correlation Method to Biogel; Polymer Engineering and Science; Vol. 50; No. 8; 1585-1593; 10.1002/pen.21636
• Tao, Min and Chokshi, Atul H., et el. (2010) Deformation and crystallization of Zr-based amorphous alloys in homogeneous flow regime; Journal of Materials Research; Vol. 25; No. 6; 1137-1148; 10.1557/JMR.2010.0134
• Schramm, Joseph P. and Demetriou, Marios D., et el. (2010) Effect of strain rate on the yielding mechanism of amorphous metal foam; Applied Physics Letters; Vol. 96; No. 2; 021906; 10.1063/1.3279132
• Maskarinec, Stacey A. and Franck, Christian, et el. (2009) Quantifying cellular traction forces in three dimensions; Proceedings of the National Academy of Sciences of the United States of America; Vol. 106; No. 52; 22108-22113; PMCID PMC2799761; 10.1073/pnas.0904565106
• Rittel, D. and Silva, M. L., et el. (2009) Thermomechanical behavior of single crystalline tantalum in the static and dynamic regime; Mechanics of Materials; Vol. 41; No. 12; 1323-1329; 10.1016/j.mechmat.2009.08.001
• Chai, Herzl and Ravichandran, Guruswami (2009) Tunneling radial cracks in layered structures from contact loading; Engineering Fracture Mechanics; Vol. 76; No. 16; 2526-2537; 10.1016/j.engfracmech.2009.09.001
• Elkhodary, K. and Sun, Lipeng, et el. (2009) Integrated Experimental, Atomistic, and Microstructurally Based Finite Element Investigation of the Dynamic Compressive Behavior of 2139 Aluminum; Journal of Applied Mechanics; Vol. 76; No. 5; Art. No. 051306; 10.1115/1.3129769
• Zhao, J. and Knauss, W. G., et el. (2009) A new shear-compression-specimen for determining quasistatic and dynamic polymer properties; Experimental Mechanics; Vol. 49; No. 3; 427-436; 10.1007/s11340-008-9171-z
• Kramer, Sharlotte L. B. and Ravichandran, Guruswami, et el. (2009) Transmission wavefront shearing interferometry for photoelastic materials; Applied Optics; Vol. 48; No. 13; 2450-2460; 10.1364/AO.48.002450
• Ponson, L. and Diest, K., et el. (2009) Competing failure mechanisms in thin films: Application to layer transfer; Journal of Applied Physics; Vol. 105; No. 7; Art. No. 073514; 10.1063/1.3078801
• Espinosa, H. D. and Ramesh, K. T., et el. (2009) Rodney James Clifton; Experimental Mechanics; Vol. 49; No. 2; 165-168; 10.1007/s11340-009-9237-6
• Daly, S. and Rittel, D., et el. (2009) Large deformation of nitinol under shear dominant loading; Experimental Mechanics; Vol. 49; No. 2; 225-233; 10.1007/s11340-008-9178-5
• Kramer, S. L. B. and Mello, M., et el. (2009) Phase shifting full-field interferometric methods for determination of in-plane tensorial stress; Experimental Mechanics; Vol. 49; No. 2; 303-315; 10.1007/s11340-009-9230-0
• Chai, Herzl and Ravichandran, Guruswami (2009) On the mechanics of fracture in monoliths and multilayers from low-velocity impact by sharp or blunt-tip projectiles; International journal of impact engineering; Vol. 36; No. 3; 375-385; 10.1016/j.ijimpeng.2008.07.065
• Poon, B. and Rittel, D., et el. (2008) An analysis of nanoindentation in elasto-plastic solids; International Journal of Solids and Structures; Vol. 45; No. 25-26; 6399-6415; 10.1016/j.ijsolstr.2008.08.016
• Poon, B. and Rittel, D., et el. (2008) An analysis of nanoindentation in linearly elastic solids; International Journal of Solids and Structures; Vol. 45; No. 24; 6018-6033; 10.1016/j.ijsolstr.2008.07.021
• Tandaiya, Parag and Ramamurty, U., et el. (2008) Effect of Poisson's ratio on crack tip fields and fracture behavior of metallic glasses; Acta Materialia; Vol. 56; No. 20; 6077-6086; 10.1016/j.actamat.2008.08.018
• Molinari, Alain and Ravichandran, Guruswami (2008) Peeling of elastic tapes: effects of large deformations, pre-straining, and of a peel-zone model; Journal of Adhesian; Vol. 84; No. 12; 961-995; 10.1080/00218460802576995
• Bouchaud, E. and Boivin, D., et el. (2008) Fracture through cavitation in a metallic glass; Europhysics Letters; Vol. 83; No. 6; Art. No. 66006; 10.1209/0295-5075/83/66006
• Nowatzki, Paul J. and Franck, Christian, et el. (2008) Mechanically Tunable Thin Films of Photosensitive Artificial Proteins:  Preparation and Characterization by Nanoindentation; Macromolecules; Vol. 41; No. 5; 1839-1845; 10.1021/ma071717a
• Chai, Herzl and Ravichandran, Guruswami (2007) On the mechanics of surface and side-wall chipping from line-wedge indentation; International Journal of Fracture; Vol. 148; No. 3; 221-231; 10.1007/s10704-008-9196-4
• Zhao, J. and Knauss, W. G., et el. (2007) Applicability of the time–temperature superposition principle in modeling dynamic response of a polyurea; Mechanics of Time-Dependent Materials; Vol. 11; No. 3-4; 289-308; 10.1007/s11043-008-9048-7
• Daly, S. and Miller, A., et el. (2007) Experimental investigation of crack initiation in thin sheets of nitinol; Acta Materialia; Vol. 55; No. 18; 6322-6330; 10.1016/j.actamat.2007.07.038
• Tan, Henry and Huang, Young, et el. (2007) Constitutive behaviors of composites with interface debonding: the extended Mori–Tanaka method for uniaxial tension; International Journal of Fracture; Vol. 146; No. 3; 139-148; 10.1007/s10704-007-9155-5
• Daly, S. and Ravichandran, G., et el. (2007) Stress-induced martensitic phase transformation in thin sheets of Nitinol; Acta Materialia; Vol. 55; No. 10; 3593-3600; 10.1016/j.actamat.2007.02.011
• Chai, Herzl and Ravichandran, Guruswami (2007) Transverse fracture in multilayers from tension and line-wedge indentation; International Journal of Fracture; Vol. 145; No. 4; 299-312; 10.1007/s10704-007-9129-7
• Franck, C. and Hong, S., et el. (2007) Three-dimensional Full-field Measurements of Large Deformations in Soft Materials Using Confocal Microscopy and Digital Volume Correlation; Experimental Mechanics; Vol. 47; No. 3; 427-438; 10.1007/s11340-007-9037-9
• Carrico, Isaac S. and Maskarinec, Stacey A., et el. (2007) Lithographic Patterning of Photoreactive Cell-Adhesive Proteins; Journal of the American Chemical Society; Vol. 129; No. 16; 4874-4785; PMCID PMC2533112; 10.1021/ja070200b
• Shilo, D. and Burcsu, E., et el. (2007) A model for large electrostrictive actuation in ferroelectric single crystals; International Journal of Solids and Structures; Vol. 44; No. 6; 2053-2065; 10.1016/j.ijsolstr.2006.07.020
• Zhang, Rongjing and Shilo, Doron, et el. (2006) Mechanical Characterization of Released Thin Films by Contact Loading; Journal of Applied Mechanics; Vol. 73; No. 5; 730-736; 10.1115/1.2166652
• Liu, C. T. and Ravichandran, G. (2006) Influence of Confining Pressure on the Crack Growth Behavior in a Highly Filled Elastomer; Journal of Applied Mechanics; Vol. 73; No. 5; 778-782; 10.1115/1.2189874
• Lykotrafitis, G. and Rosakis, A. J., et el. (2006) Particle Velocimetry and Photoelasticity Applied to the Study of Dynamic Sliding Along Frictionally-Held Bimaterial Interfaces: Techniques and Feasibility; Experimental Mechanics; Vol. 46; No. 2; 205-216; 10.1007/s11340-006-6418-4
• Franck, Christian and Ravichandran, Guruswami, et el. (2006) Characterization of domain walls in BaTiO3 using simultaneous atomic force and piezo response force microscopy; Applied Physics Letters; Vol. 88; No. 10; Art. No. 102907; 10.1063/1.2185640
• Gu, Y. and Ravichandran, G. (2005) Prediction of incipient shear band trajectories in a thick wall cylinder explosion test; Experimental Mechanics; Vol. 45; No. 5; 447-450; 10.1007/bf02427993
• Shilo, Doron and Ravichandran, Guruswami, et el. (2004) Investigation of twin-wall structure at the nanometre scale using atomic force microscopy; Nature Materials; Vol. 3; No. 7; 453-457; 10.1038/nmat1151
• Burcsu, E. and Ravichandran, G., et el. (2004) Large electrostrictive actuation of barium titanate single crystals; Journal of the Mechanics and Physics of Solids; Vol. 52; No. 4; 823-846; 10.1016/j.jmps.2003.08.001
• Molinari, A. and Ravichandran, G. (2004) Fundamental structure of steady plastic shock waves in metals; Journal of Applied Physics; Vol. 95; No. 4; 1718-1732; 10.1063/1.1640452
• Vural, M. and Rittel, D., et el. (2003) Large strain mechanical behavior of 1018 cold-rolled steel over a wide range of strain rates; Metallurgical and Material Transactions A; Vol. 34; No. 12; 2873-2885; 10.1007/s11661-003-0188-8
• Bhattacharya, K. and Ravichandran, G. (2003) Ferroelectric perovskites for electromechanical actuation; Acta Materialia; Vol. 51; No. 19; 5941-5960; 10.1016/j.actamat.2003.08.001
• Lu, Jun and Ravichandran, Guruswami (2003) Pressure-dependent flow behavior of Zr_(41.2)Ti_(13.8)Cu_(12.5)Ni_(10)Be_(22.5) bulk metallic glass; Journal of Materials Research; Vol. 18; No. 9; 2039-2049
• Yadav, S. and Ravichandran, G. (2003) Penetration resistance of laminated ceramic/polymer structures; International Journal of Impact Engineering; Vol. 28; No. 5; 557-574; 10.1016/S0734-743X(02)00122-7
• Rittel, D. and Ravichandran, G., et el. (2002) Large strain constitutive behavior of OFHC copper over a wide range of strain rates using the shear compression specimen; Mechanics of Materials; Vol. 34; No. 10; 627-642; 10.1016/S0167-6636(02)00164-3
• Zhuang, Shiming and Lu, Jun, et el. (2002) Shock wave response of a zirconium-based bulk metallic glass and its composite; Applied Physics Letters; Vol. 80; No. 24; 4522-4524; 10.1063/1.1485300
• Rittel, D. and Lee, S., et el. (2002) A shear-compression specimen for large strain testing; Experimental Mechanics; Vol. 42; No. 1; 58-64; 10.1177/0018512002042001790
• Vaidyanathan, R. and Dao, M., et el. (2001) Study of mechanical deformation in bulk metallic glass through instrumented indentation; Acta Materialia; Vol. 49; No. 18; 3781-3789; 10.1016/S1359-6454(01)00263-4
• Oguni, K. and Ravichandran, G. (2001) A micromechanical failure model for unidirectional fiber reinforced composites; International Journal of Solids and Structures; Vol. 38; No. 40-41; 7215-7233; 10.1016/S0020-7683(00)00284-5
• Guduru, P. R. and Ravichandran, G., et el. (2001) Observations of transient high temperature vortical microstructures in solids during adiabatic shear banding; Physical Review E; Vol. 64; No. 3; Art. No. 036128; 10.1103/PhysRevE.64.036128
• Yadav, S. and Repetto, E. A., et el. (2001) A computational study of the influence of thermal softening on ballistic penetration in metals; International Journal of Impact Engineering; Vol. 25; No. 8; 787-803; 10.1016/S0734-743X(01)00008-2
• Guduru, P. R. and Zehnder, A. T., et el. (2001) Dynamic full field measurements of crack tip temperatures; Engineering Fracture Mechanics; Vol. 68; No. 14; 1535-1556; 10.1016/S0013-7944(01)00045-5
• Venkert, A. and Guduru, P. R., et el. (2001) Effect of loading rate on fracture morphology in a high strength ductile steel; Journal of Engineering Materials and Technology; Vol. 123; No. 3; 261-267; 10.1115/1.1371231
• Guduru, P. R. and Rosakis, A. J., et el. (2001) Dynamic shear bands: an investigation using high speed optical and infrared diagnostics; Mechanics of Materials; Vol. 33; No. 7; 371-402; 10.1016/S0167-6636(01)00051-5
• Oguni, K. and Ravichandran, G. (2001) Dynamic compressive behavior of unidirectional E-glass/vinylester composites; Journal of Materials Science; Vol. 36; No. 4; 831-838; 10.1023/A:1004822328157
• Oguni, K. and Tan, C. Y., et el. (2000) Failure Mode Transition in Unidirectional E-Glass/Vinylester Composites under Multiaxial Compression; Journal of Composite Materials; Vol. 34; No. 24; 2081-2097; 10.1177/002199800772661912
• Zehnder, Alan T. and Guduru, Pradeep R., et el. (2000) Million frames per second infrared imaging system; Review of Scientific Instruments; Vol. 71; No. 10; 3762-3768; 10.1063/1.1310350
• Burscu, E. and Ravichandran, G., et el. (2000) Large strain electrostrictive actuation in barium titanate; Applied Physics Letters; Vol. 77; No. 11; 1698-1700; 10.1063/1.1308533
• Oguni, K. and Ravichandran, G. (2000) An energy-based model of longitudinal splitting in unidirectional fiber-reinforced composites; Journal of Applied Mechanics; Vol. 67; No. 3; 437-443; 10.1115/1.1311276
• Hodowany, J. and Ravichandran, G., et el. (2000) Partition of Plastic Work into Heat and Stored Energy in Metals; Experimental Mechanics; Vol. 40; No. 2; 113-123; 10.1007/BF02325036
• Venkert, A. and Guduru, P. R., et el. (2000) An investigation of dynamic failure in 2.3Ni-1.3Cr-0.17C steel; Metallurgical and Materials Transactions A; Vol. 31; No. 4; 1147-1154; 10.1007/s11661-000-0110-6
• Rosakis, P. and Rosakis, A. J., et el. (2000) A Thermodynamic Internal Variable Model for the Partition of Plastic Work into Heat and Stored Energy in Metals; Journal of the Mechanics and Physics of Solids; Vol. 48; No. 3; 581-607; 10.1016/S0022-5096(99)00048-4
• Rosakis, Ares J. and Ravichandran, G. (2000) Dynamic Failure Mechanics; International Journal of Solids and Structures; Vol. 37; No. 1-2; 331-348; 10.1016/S0020-7683(99)00097-9
• Chen, W. and Ravichandran, G. (2000) Failure mode transition in ceramics under dynamic multiaxial compression; International Journal of Fracture; Vol. 101; No. 1-2; 141-159; 10.1023/A:1007672422700
• Kalantar, D. H. and Chandler, E. A., et el. (1999) Transient x-ray diffraction used to diagnose shock compressed Si crystals on the Nova laser; Review of Scientific Instruments; Vol. 70; No. 1; 629-632
• Lee, Yeong Joo and Subhash, Ghatu, et el. (1999) Constitutive Modeling of Textured Body Centered Cubic (BCC) Polycrystals; International Journal of Plasticity; Vol. 15; No. 6; 625-645; 10.1016/S0749-6419(99)00004-2
• Dümmer, T. and Lasalvia, J. C., et el. (1998) Effect of Strain Rate on Plastic Flow and Failure in Polycrystalline Tungsten; Acta Materialia; Vol. 46; No. 17; 6267-6290; 10.1016/S1359-6454(98)00255-9
• Guduru, P. R. and Singh, R. P., et el. (1998) Dynamic Crack Initiation in Ductile Steels; Journal of the Mechanics and Physics of Solids; Vol. 46; No. 10; 1997-2016; 10.1016/S0022-5096(98)00035-0
• Bhattacharya, K. and Ortiz, M., et el. (1998) Energy-based model of compressive splitting in heterogeneous brittle solids; Journal of the Mechanics and Physics of Solids; Vol. 46; No. 10; 2171-2181; 10.1016/S0022-5096(98)00026-X
• Ravichandran, G. and Liu, C. T. (1998) Crack-Tip Shielding in Particulate Composites Undergoing Damage; Engineering Fracture Mechanics; Vol. 59; No. 6; 713-723; 10.1016/S0013-7944(97)00182-3
• Subhash, G. and Ravichandran, G. (1998) Mechanical Behavior of a Hot-Pressed Aluminum Nitride Under Uniaxial Compression; Journal of Materials Science; Vol. 33; No. 7; 1933-1939; 10.1023/A:1004325926287
• Zhou, M. and Rosakis, A. J., et el. (1998) On the growth of shear bands and failure-mode transition in prenotched plates: A comparison of singly and doubly notched specimens; International Journal of Plasticity; Vol. 14; No. 4-5; 435-451; 10.1016/S0749-6419(98)00003-5
• Owen, D. M. and Zhuang, S., et el. (1998) Experimental Determination of Dynamic Crack Initiation and Propagation Fracture Toughness in Thin Aluminum Sheets; International Journal of Fracture; Vol. 90; No. 1-2; 153-174; 10.1023/A:1007439301360
• Chen, Weinong and Ravichandran, G. (1997) Dynamic Compressive Failure of a Glass Ceramic under Lateral Confinement; Journal of the Mechanics and Physics of Solids; Vol. 45; No. 8; 1303-1328; 10.1016/S0022-5096(97)00006-9
• Walter, M. E. and Ravichandran, G., et el. (1997) Computational modeling of damage evolution in unidirectional fiber reinforced ceramic matrix composites; Computational Mechanics; Vol. 20; No. 1-2; 192-198; 10.1007/s004660050239
• Subhash, G. and Ravichandran, G., et el. (1997) Plastic Deformation of Hafnium under Uniaxial Compression; Metallurgical and Material Transactions A; Vol. 28; No. 7; 1479-1487; 10.1007/s11661-997-0210-7
• Walter, M. E. and Ravichandran, G. (1997) Experimental Simulation of Matrix Cracking and Debonding in a Model Brittle Matrix Composite; Experimental Mechanics; Vol. 37; No. 2; 126-131; 10.1007/BF02317847
• Wright, T. W. and Ravichandran, G. (1997) Canonical Aspects of Adiabatic Shear Bands; International Journal of Plasticity; Vol. 13; No. 4; 309-325; 10.1016/S0749-6419(97)80002-2
• Chen, W. and Ravichandran, G. (1996) An Experimental Technique for Imposing Dynamic Multiaxial-Compression with Mechanical Confinement; Experimental Mechanics; Vol. 36; No. 2; 155-158; 10.1007/BF02328712
• Zhou, M. and Rosakis, A. J., et el. (1996) Dynamically propagating shear bands in impact-loaded prenotched plates—I. Experimental investigations of temperature signatures and propagation speed; Journal of the Mechanics and Physics of Solids; Vol. 44; No. 6; 981-1006; 10.1016/0022-5096(96)00003-8
• Chen, Weinong and Ravichandran, G. (1996) Static and Dynamic Compressive Behavior of Aluminum Nitride under Moderate Confinement; Journal of the American Ceramic Society; Vol. 79; No. 3; 579-584; 10.1111/j.1151-2916.1996.tb07913.x
• Benson, D. J. and Tong, W., et el. (1995) Particle Level Modeling of Dynamic Consolidation of Ti-SiC Powders; Modelling and Simulation in Materials Science and Engineering; Vol. 3; No. 6; 771-796; 10.1088/0965-0393/3/6/003
• Tong, W. and Ravichandran, G. (1995) Inertial Effects on Void Growth in Viscoplastic Materials; Journal of Applied Mechanics; Vol. 62; No. 3; 633-639; 10.1115/1.2895993
• Ravichandran, G. and Subhash, G. (1995) A Micromechanical Model for High-Strain-Rate Behavior of Ceramics; International Journal of Solids and Structures; Vol. 32; No. 17-18; 2627-2646; 10.1016/0020-7683(94)00286-6
• Ravichandran, G. and Liu, C. T. (1995) Modeling Constitutive Behavior of Particulate Composites Undergoing Damage; International Journal of Solids and Structures; Vol. 32; No. 6-7; 979-990; 10.1016/0020-7683(94)00172-S
• Walter, M. E. and Ravichandran, G. (1995) An Experimental Investigation of Damage Evolution in a Ceramic Matrix Composite; Journal of Engineering Materials and Technology; Vol. 117; No. 1; 101-108; 10.1115/1.2804360
• Tong, W. and Ravichandran, G., et el. (1995) Processing SiC-particulate reinforced titanium-based metal matrix composites by shock wave consolidation; Acta Metallurgica et Materialia; Vol. 43; No. 1; 235-250; 10.1016/0956-7151(95)90279-1
• Tong, W. and Ravichandran, G. (1994) Rise time in shock consolidation of materials; Applied Physics Letters; Vol. 65; No. 22; 2783-2785; 10.1063/1.112562
• Mason, James J. and Rosakis, Ares J., et el. (1994) Full Field Measurements of the Dynamic Deformation Field Around a Growing Adiabatic Shear Band at the Tip of a Dynamically Loaded Notch; Journal of the Mechanics and Physics of Solids; Vol. 42; No. 11; 1679-1697; 10.1016/0022-5096(94)90067-1
• Chen, W. and Ravichandran, G. (1994) Dynamic compressive behaviour of ceramics under lateral confinement; Journal de Physique IV (Proceedings); Vol. 4; No. C8; 177-182; 10.1051/jp4:1994825
• Chen, W. and Subhash, G., et el. (1994) Evaluation of Ceramic Specimen Geometries Used in a Split Hopkinson Pressure Bar; Dymat Journal; Vol. 1; No. 3; 193-210
• Tong, W. and Ravichandran, G., et el. (1994) Processing and properties of SiC-particulate reinforced titanium matrix composites by shock wave consolidation; Journal de Physique; Vol. 4; No. C8; 331-336; 10.1051/jp4:1994850
• Mason, J. J. and Rosakis, A. J., et el. (1994) On the Strain and Strain-Rate Dependence of Plastic Work Converted to Heat: An Experimental Study Using High Speed Infrared Detectors and the Kolsky Bar; Mechanics of Materials; Vol. 17; No. 2-3; 135-145; 10.1016/0167-6636(94)90054-X
• Subhash, G. and Lee, Y. J., et el. (1994) Plastic deformation of CVD textured tungsten — I. Constitutive response; Acta Metallurgica et Materialia; Vol. 42; No. 1; 319-330; 10.1016/0956-7151(94)90074-4
• Ravichandran, Guruswami and Subhash, Ghatuparthi (1994) Critical Appraisal of Limiting Strain Rates for Testing Ceramics in a Split Hopkinson Pressure Bar; Journal of the American Ceramic Society; Vol. 77; No. 1; 263-267; 10.1111/j.1151-2916.1994.tb06987.x
• Srinivas, M. V. and Ravichandran, G. (1994) Interfacial Crack Propagation in a Thin Viscoelastic Film Bonded to an Elastic Substrate; International Journal of Fracture; Vol. 65; No. 1; 31-47; 10.1007/BF00017141
• Ravichandran, G. (1994) Influence of Processing on the High Strain Rate Behavior of Refractory Metals - A Review; Materials and Manufacturing Processes; Vol. 9; No. 6; 1031-1046; 10.1080/10426919408934974
• Rosakis, A. J. and Mason, J. J., et el. (1993) The Conversion of Plastic Work to Heat around a Dynamically Propagating Crack in Metals; Journal of Mechanical Behavior of Materials; Vol. 4; No. 4; 375-385; 10.1515/JMBM.1993.4.4.375
• Tong, W. and Ravichandran, G. (1993) Dynamic pore collapse in viscoplastic materials; Journal of Applied Physics; Vol. 74; No. 4; 2425-2435; 10.1063/1.354678
• Krishnaswamy, Sridhav and Rosakis, Ares J., et el. (1991) On the Extent of Dominance of Asymptotic Elastodynamic Crack-tip Fields: Part II - Numerical Investigation of Three Dimensional and Transient Effects; Journal of Applied Mechanics; Vol. 58; No. 1; 95-103; 10.1115/1.2897185
• Ramesh, K. T. and Ravichandran, G. (1990) Dynamic Behavior of a Boron Carbide-Aluminum Cermet: Experiments and Observations; Mechanics of Materials; Vol. 10; No. 1-2; 19-29; 10.1016/0167-6636(90)90014-7
• Ravichandran, G. and Clifton, R. J. (1989) Dynamic Fracture Under Plane Wave Loading; International Journal of Fracture; Vol. 40; No. 3; 157-201; 10.1007/BF00960599
• Godse, R. and Ravichandran, G., et el. (1989) Micromechanisms of Dynamic Crack Propagation in an AISI 4340 Steel; Materials Science and Engineering A; Vol. 112; 79-88; 10.1016/0921-5093(89)90346-8
• Ravichandran, G. and Knauss, W. G. (1989) A Finite Elastostatic Analysis of Bimaterial Interface Cracks; International Journal of Fracture; Vol. 39; No. 1-3; 235-253; 10.1007/BF00047452