Johnson, William Lewis

Article from CaltechAUTHORS

• Shen, Yidi and Johnson, William L., et el. (2022) Shear Banding in Binary Cu-Zr Metallic Glass: Comparison of the G-Phase With L-Phase; Frontiers in Materials; Vol. 9; Art. No. 886788; 10.3389/fmats.2022.886788
• An, Qi and Johnson, William L., et el. (2021) The first order L-G phase transition in liquid Ag and Ag-Cu alloys is driven by deviatoric strain; Scripta Materialia; Vol. 194; Art. No. 113695; 10.1016/j.scriptamat.2020.113695
• An, Qi and Johnson, William L., et el. (2020) Formation of Two Glass Phases in Binary Cu-Ag Liquid; Acta Materialia; Vol. 195; 274-281; 10.1016/j.actamat.2020.05.060
• Na, Jong H. and Corona, Sydney L., et el. (2020) Observation of an apparent first-order glass transition in ultrafragile Pt–Cu–P bulk metallic glasses; Proceedings of the National Academy of Sciences of the United States of America; Vol. 117; No. 6; 2779-2787; PMCID PMC7022193; 10.1073/pnas.1916371117
• An, Qi and Johnson, William L., et el. (2020) First Order Phase Transition in Liquid Ag to the Heterogeneous G-Phase; Journal of Physical Chemistry Letters; Vol. 11; No. 3; 632-645; 10.1021/acs.jpclett.9b03699
• Na, Jong Hyun and Han, Kyung Hee, et el. (2019) Designing color in metallic glass; Scientific Reports; Vol. 9; Art. No. 3269; PMCID PMC6397249; 10.1038/s41598-019-40014-w
• Mohr, Markus and Wunderlich, Rainer K., et el. (2019) Surface tension and viscosity of liquid Pd_(43)Cu_(27)Ni_(10)P_(20) measured in a levitation device under microgravity; npj Microgravity; Vol. 5; Art. No. 4; 10.1038/s41526-019-0065-4
• Floyd, Michael and Demetriou, Marios D., et el. (2018) Optimizing glass formation in ferromagnetic alloys through chemical fluxing; Scripta Materialia; Vol. 146; 312-315; 10.1016/j.scriptamat.2017.12.013
• Hofmann, Douglas C. and Andersen, Laura M., et el. (2017) Optimizing Bulk Metallic Glasses for Robust, Highly Wear-Resistant Gears; Advanced Engineering Materials; Vol. 19; No. 1; Art. No. 1600541; 10.1002/adem.201600541
• Hofmann, Douglas C. and Polit-Casillas, Raul, et el. (2016) Castable Bulk Metallic Glass Strain Wave Gears: Towards Decreasing the Cost of High-Performance Robotics; Scientific Reports; Vol. 6; Art. No. 37773; PMCID PMC5121900; 10.1038/srep37773
• Garrett, Glenn R. and Demetriou, Marios D., et el. (2016) Origin of embrittlement in metallic glasses; Proceedings of the National Academy of Sciences of the United States of America; Vol. 113; No. 37; 10257-10262; PMCID PMC5027437; 10.1073/pnas.1610920113
• An, Qi and Samwer, Konrad, et el. (2016) How the toughness in metallic glasses depends on topological and chemical heterogeneity; Proceedings of the National Academy of Sciences of the United States of America; Vol. 113; No. 26; 7053-7058; PMCID PMC4932989; 10.1073/pnas.1607506113
• Kolodziejska, Joanna A. and Kozachkov, Henry, et el. (2016) Towards an understanding of tensile deformation in Ti-based bulk metallic glass matrix composites with BCC dendrites; Scientific Reports; Vol. 6; Art. No. 22563; PMCID PMC4773831; 10.1038/srep22563
• Kaltenboeck, Georg and Demetriou, Marios D., et el. (2016) Shaping metallic glasses by electromagnetic pulsing; Nature Communications; Vol. 7; No. 2; Art. No. 10576; PMCID PMC4748118; 10.1038/ncomms10576
• Johnson, W. L. and Na, J. H., et el. (2016) Quantifying the origin of metallic glass formation; Nature Communications; Vol. 7; Art. No. 10313; PMCID PMC4735709; 10.1038/ncomms10313
• Kaltenboeck, Georg and Harrison, Thomas, et el. (2014) Accessing thermoplastic processing windows in metallic glasses using rapid capacitive discharge; Scientific Reports; Vol. 4; Art. No. 6441; PMCID PMC4180804; 10.1038/srep06441
• Na, Jong Hyun and Demetriou, Marios D., et el. (2014) Compositional landscape for glass formation in metal alloys; Proceedings of the National Academy of Sciences of the United States of America; Vol. 111; No. 25; 9031-9036; PMCID PMC4078826; 10.1073/pnas.1407780111
• Hamill, Lee and Roberts, Scott, et el. (2014) Hypervelocity Impact Phenomenon in Bulk Metallic Glasses and Composites; Advanced Engineering Materials; Vol. 16; No. 1; 85-93; 10.1002/adem.201300252
• Gludovatz, Bernd and Demetriou, Marios D., et el. (2013) Enhanced fatigue endurance of metallic glasses through a staircase-like fracture mechanism; Proceedings of the National Academy of Sciences of the United States of America; Vol. 110; No. 46; 18419-18424; PMCID PMC3832019; 10.1073/pnas.1317715110
• Kozachkov, Henry and Kolodziejska, Joanna, et el. (2013) Effect of cooling rate on the volume fraction of B2 phases in a CuZrAlCo metallic glass matrix composite; Intermetallics; Vol. 39; 89-93; 10.1016/j.intermet.2013.03.017
• Liu, Xiao and Demetriou, Marios D., et el. (2013) Description of millisecond Ohmic heating and forming of metallic glasses; Acta Materialia; Vol. 61; No. 8; 3060-3067; 10.1016/j.actamat.2013.01.066
• Davidson, Marc and Roberts, Scott, et el. (2013) Investigating Amorphous Metal Composite Architectures as Spacecraft Shielding; Advanced Engineering Materials; Vol. 15; No. 1-2; 27-33; 10.1002/adem.201200313
• Kozachkov, Henry and Kolodziejska, Joanna A., et el. (2013) Study of Mushy-Zone Development in Dendritic Microstructures with Glass-Forming Eutectic Matrices Using Electrostatic Levitation; ISRN Materials Science; Vol. 2013; Art. No. 108363; 10.1155/2013/108363
• Garrett, Glenn R. and Demetriou, Marios D., et el. (2012) Effect of microalloying on the toughness of metallic glasses; Applied Physics Letters; Vol. 101; No. 24; Art. No. 241913; 10.1063/1.4769997
• An, Qi and Samwer, Konrad, et el. (2012) Predicted Optimum Composition for the Glass-Forming Ability of Bulk Amorphous Alloys: Application to Cu−Zr−Al; Journal of Physical Chemistry Letters; Vol. 3; No. 21; 3143-3148; 10.1021/jz3014425
• An, Qi and Luo, Sheng-Nian, et el. (2012) Synthesis of single-component metallic glasses by thermal spray of nanodroplets on amorphous substrates; Applied Physics Letters; Vol. 100; No. 4; Art. No. 041909; 10.1063/1.3675909
• Demetriou, Marios D. and Floyd, Michael, et el. (2011) Liquid-like platinum-rich glasses; Scripta Materialia; Vol. 65; No. 9; 799-802; 10.1016/j.scriptamat.2011.07.035
• Na, Jong Hyun and Demetriou, Marios D., et el. (2011) Fragility of iron-based glasses; Applied Physics Letters; Vol. 99; No. 16; Art. No. 161902; 10.1063/1.3651763
• An, Qi and Garrett, Glenn, et el. (2011) Atomistic Characterization of Stochastic Cavitation of a Binary Metallic Liquid under Negative Pressure; Journal of Physical Chemistry Letters; Vol. 2; No. 11; 1320-1323; 10.1021/jz200351m
• Johnson, William L. and Kaltenboeck, Georg, et el. (2011) Beating Crystallization in Glass-Forming Metals by Millisecond Heating and Processing; Science; Vol. 332; No. 6031; 828-833; 10.1126/science.1201362
• Li, John J. Z. and Rhim, W. K., et el. (2011) Evidence for a liquid–liquid phase transition in metallic fluids observed by electrostatic levitation; Acta Materialia; Vol. 59; No. 5; 2166-2171; 10.1016/j.actamat.2010.12.017
• Demetriou, Marios D. and Launey, Maximilien E., et el. (2011) A damage-tolerant glass; Nature Materials; Vol. 10; No. 2; 123-128; 10.1038/NMAT2930
• Schramm, Joseph P. and Hofmann, Douglas C., et el. (2010) Metallic-glass-matrix composite structures with benchmark mechanical performance; Applied Physics Letters; Vol. 97; No. 24; Art. No. 241910; 10.1063/1.3521412
• Wang, Gongyao and Demetriou, Marios D., et el. (2010) Compression-compression fatigue of Pd_(43)Ni_(10)Cu_(27)P_(20) metallic glass foam; Journal of Applied Physics; Vol. 108; No. 2; Art. No. 023505; 10.1063/1.3457221
• Xu, Donghua and Wirth, Brian D., et el. (2010) Calculating glass-forming ability in absence of key kinetic and thermodynamic parameters; Applied Physics Letters; Vol. 97; No. 2; Art. No. 024102; 10.1063/1.3462315
• Kai, W. and Ren, I. F., et el. (2010) Oxidation Behavior of a Pd_(43)Cu_(27)Ni_(10)P_(20) Bulk Metallic Glass and Foam in Dry Air; Metallurgical and Material Transactions A; Vol. 41A; No. 7; 1720-1725; 10.1007/s11661-010-0231-5
• Tao, Min and Chokshi, Atul H., et el. (2010) Deformation and crystallization of Zr-based amorphous alloys in homogeneous flow regime; Journal of Materials Research; Vol. 25; No. 6; 1137-1148; 10.1557/JMR.2010.0134
• Suh, Jin-Yoo and Conner, R. Dale, et el. (2010) Correlation between fracture surface morphology and toughness in Zr-based bulk metallic glasses; Journal of Materials Research; Vol. 25; No. 5; 982-990; 10.1557/JMR.2010.0112
• Wiest, Aaron and Wang, Gongyao, et el. (2010) Corrosion and corrosion fatigue of Vitreloy glasses containing low fractions of late transition metals; Scripta Materialia; Vol. 62; No. 8; 540-543; 10.1016/j.scriptamat.2009.12.025
• Demetriou, Marios D. and Wiest, Aaron, et el. (2010) Amorphous metals for hard-tissue prosthesis; JOM - Journal of the Minerals, Metals and Materials Society; Vol. 62; No. 2; 83-91; 10.1007/s11837-010-0038-2
• Schramm, Joseph P. and Demetriou, Marios D., et el. (2010) Effect of strain rate on the yielding mechanism of amorphous metal foam; Applied Physics Letters; Vol. 96; No. 2; 021906; 10.1063/1.3279132
• Boopathy, Kombaiah and Hofmann, Douglas C., et el. (2009) Near-threshold fatigue crack growth in bulk metallic glass composites; Journal of Materials Research; Vol. 24; No. 12; 3611-3619; 10.1557/JMR.2009.0439
• Hofmann, Douglas C. and Kozachkov, Henry, et el. (2009) Semi-solid induction forging of metallic glass matrix composites; JOM - Journal of the Minerals, Metals and Materials Society; Vol. 61; No. 12; 11-17; 10.1007/s11837-009-0172-x
• Kahl, A. and Koeppe, T., et el. (2009) Dynamical and quasistatic structural relaxation paths in Pd_(40)Ni_(40)P_(20) glass; Applied Physics Letters; Vol. 95; No. 20; Art. No. 201903; 10.1063/1.3266828
• Demetriou, Marios D. and Johnson, William L., et el. (2009) Rheology and ultrasonic properties of metallic glass-forming liquids; Journal of Alloys and Compounds; Vol. 483; No. 1-2; 650-654; 10.1016/j.jallcom.2007.11.151
• Demetriou, Marios D. and Kaltenboeck, Georg, et el. (2009) Glassy steel optimized for glass-forming ability and toughness; Applied Physics Letters; Vol. 95; No. 4; Art. No. 041907; 10.1063/1.3184792
• Launey, M. E. and Hofmann, D. C., et el. (2009) Fracture toughness and crack-resistance curve behavior in metallic glass-matrix composites; Applied Physics Letters; Vol. 94; No. 24; Art. No. 241910; 10.1063/1.3156026
• Demetriou, Marios D. and Johnson, William L., et el. (2009) Coarse-grained description of localized inelastic deformation in amorphous metals; Applied Physics Letters; Vol. 94; No. 19; 191905; 10.1063/1.3133942
• Launey, Maximilien E. and Hofmann, Douglas C., et el. (2009) Solution to the problem of the poor cyclic fatigue resistance of bulk metallic glasses; Proceedings of the National Academy of Sciences of the United States of America; Vol. 106; No. 13; 4986-4991; PMCID PMC2663983; 10.1073/pnas.0900740106
• Wiest, Aaron and Harmon, John S., et el. (2009) Injection molding metallic glass; Scripta Materialia; Vol. 60; No. 3; 160-163; 10.1016/j.scriptamat.2008.09.021
• Kim, C. Paul and Suh, Jin-Yoo, et el. (2009) Fracture toughness study of new Zr-based Be-bearing bulk metallic glasses; Scripta Materialia; Vol. 60; No. 2; 80-83; 10.1016/j.scriptamat.2008.09.001
• Hofmann, Douglas C. and Suh, Jin-Yoo, et el. (2008) Development of tough, low-density titanium-based bulk metallic glass matrix composites with tensile ductility; Proceedings of the National Academy of Sciences of the United States of America; Vol. 105; No. 51; 20136-20140; PMCID PMC2629257; 10.1073/pnas.0809000106
• Demetriou, Marios D. and Veazey, Chris, et el. (2008) Stochastic Metallic-Glass Cellular Structures Exhibiting Benchmark Strength; Physical Review Letters; Vol. 101; No. 14; Art. No. 145702; 10.1103/PhysRevLett.101.145702
• Suh, Jin-Yoo and Lohwongwatana, Boonrat, et el. (2008) Novel thermoplastic bonding using a bulk metallic glass solder; Scripta Materialia; Vol. 59; No. 8; 905-908; 10.1016/j.scriptamat.2008.06.055
• Hofmann, Douglas C. and Suh, Jin-Yoo, et el. (2008) New processing possibilities for highly toughened metallic glass matrix composites with tensile ductility; Scripta Materialia; Vol. 59; No. 7; 684-687; 10.1016/j.scriptamat.2008.05.046
• Barnard, B. R. and Liaw, P. K., et el. (2008) Oxidation behaviour of metallic glass foams; Corrosion Science; Vol. 50; No. 8; 2135-2139; 10.1016/j.corsci.2008.04.025
• Wall, J. J. and Liu, C. T., et el. (2008) Heterogeneous nucleation in a glass-forming alloy; Applied Physics Letters; Vol. 92; No. 24; Art. No. 244106; 10.1063/1.2948861
• Hachenberg, Jörg and Bedorf, Dennis, et el. (2008) Merging of the alpha and beta relaxations and aging via the Johari–Goldstein modes in rapidly quenched metallic glasses; Applied Physics Letters; Vol. 92; No. 13; Art. No. 131911; 10.1063/1.2903697
• Demetriou, Marios D. and Schramm, Joseph P., et el. (2007) High porosity metallic glass foam: A powder metallurgy route; Applied Physics Letters; Vol. 91; No. 16; Art. No. 161903; 10.1063/1.2799248
• Harmon, John S. and Demetriou, Marios D., et el. (2007) Anelastic to Plastic Transition in Metallic Glass-Forming Liquids; Physical Review Letters; Vol. 99; No. 13; Art. No. 135502; 10.1103/PhysRevLett.99.135502
• Demetriou, Marios D. and Veazey, Chris, et el. (2007) Thermo-plastic expansion of amorphous metallic foam; Journal of Alloys and Compounds; Vol. 434; 92-96; 10.1016/j.jallcom.2006.08.323
• Duan, Gang and Lind, Mary Laura, et el. (2007) Thermal and elastic properties of Cu–Zr–Be bulk metallic glass forming alloys; Applied Physics Letters; Vol. 90; No. 21; Art. No. 211901; 10.1063/1.2741050
• Harmon, John S. and Demetriou, Marios D., et el. (2007) Rheology and ultrasonic properties of Pt57.5Ni5.3Cu14.7P22.5 liquid; Applied Physics Letters; Vol. 90; No. 17; Art. No. 171923; 10.1063/1.2732822
• Harmon, John S. and Demetriou, Marios D., et el. (2007) Deformation of glass forming metallic liquids: Configurational changes and their relation to elastic softening; Applied Physics Letters; Vol. 90; No. 13; Art. No. 131912; 10.1063/1.2717017
• Choi-Yim, Haein and Xu, Donhua, et el. (2007) Structures and properties of bulk glass forming Ni-Nb-Sn alloys and Ni-Nb-Ta-Sn alloys; Materials Science and Engineering A; Vol. 449; 134-138; 10.1016/j.msea.2006.02.263
• Schroers, Jan and Lohwongwatana, Boonrat, et el. (2007) Precious bulk metallic glasses for jewelry applications; Materials Science and Engineering A; Vol. 449-45; 235-238; 10.1016/j.msea.2006.02.301
• Demetriou, Marios D. and Veazey, Chris, et el. (2007) Expansion evolution during foaming of amorphous metals; Material Science and Engineering: A; Vol. 449-45; 863-867; 10.1016/j.msea.2006.02.299
• Fan, G. J. and Freels, M., et el. (2006) Thermophysical and elastic properties of Cu50Zr50 and (Cu50Zr50)95Al5 bulk-metallic-glass-forming alloys; Applied Physics Letters; Vol. 89; No. 24; Art. No. 241917; 10.1063/1.2408634
• Duan, Gang and Lind, Mary Laura, et el. (2006) Strong configurational dependence of elastic properties for a binary model metallic glass; Applied Physics Letters; Vol. 89; No. 15; Art. No. 151901; 10.1063/1.2360203
• Li, John J. Z. and Johnson, William L., et el. (2006) Thermal expansion of liquid Ti–6Al–4V measured by electrostatic levitation; Applied Physics Letters; Vol. 89; No. 11; Art. No. 111913; 10.1063/1.2349840
• Demetriou, Marios D. and Harmon, John S., et el. (2006) Cooperative Shear Model for the Rheology of Glass-Forming Metallic Liquids; Physical Review Letters; Vol. 97; No. 6; Art. No. 065502; 10.1103/PhysRevLett.97.065502
• Zhou, Zhenhua and Uher, Ctirad, et el. (2006) On the existence of Einstein oscillators and thermal conductivity in bulk metallic glass; Applied Physics Letters; Vol. 89; No. 3; Art. No. 031924; 10.1063/1.2234281
• Lind, Mary Laura and Duan, Gang, et el. (2006) Isoconfigurational Elastic Constants and Liquid Fragility of a Bulk Metallic Glass Forming Alloy; Physical Review Letters; Vol. 97; No. 1; Art. No. 015501; 10.1103/PhysRevLett.97.015501
• Zink, Mareike and Samwer, K., et el. (2006) Validity of temperature and time equivalence in metallic glasses during shear deformation; Physical Review B; Vol. 74; No. 1; Art. No. 012201; 10.1103/PhysRevB.74.012201
• Xu, Donghua and Johnson, William L. (2006) Crystallization kinetics and glass-forming ability of bulk metallic glasses Pd40Cu30Ni10P20 and Zr41.2Ti13.8Cu12.5Ni10Be22.5 from classical theory; Physical Review B; Vol. 74; No. 2; Art. No. 024207; 10.1103/PhysRevB.74.024207
• Fan, G. J. and Li, J. J. Z., et el. (2006) Thermophysical properties of a Cu46Zr42Al7Y5 bulk metallic glass-forming liquid; Applied Physics Letters; Vol. 88; No. 22; Art. No. 221909; 10.1063/1.2208550
• Zink, Mareike and Samwer, K., et el. (2006) Plastic deformation of metallic glasses: Size of shear transformation zones from molecular dynamics simulations; Physical Review B; Vol. 73; No. 17; Art. No. 172203; 10.1103/PhysRevB.73.172203
• Lohwongwatana, Boonrat and Schroers, Jan, et el. (2006) Strain Rate Induced Crystallization in Bulk Metallic Glass-Forming Liquid; Proceedings of the IEEE; Vol. 96; No. 7; Art. No. 075503; 10.1103/PhysRevLett.96.075503
• Johnson, W. L. and Samwer, K. (2005) A Universal Criterion for Plastic Yielding of Metallic Glasses with a (T/Tg)2/3 Temperature Dependence; Physical Review Letters; Vol. 95; No. 19; Art. no. 195501; 10.1103/PhysRevLett.95.195501
• Kim, Ki Buem and Yi, Seonghoon, et el. (2005) Interfacial instability-driven amorphization/nanocrystallization in a bulk Ni45Cu5Ti33Zr16Si1 alloy during solidification; Physical Review B; Vol. 72; No. 9; Art. No. 092102; 10.1103/PhysRevB.72.092102
• Schroers, Jan and Lohwongwatana, Boonrat, et el. (2005) Gold based bulk metallic glass; Applied Physics Letters; Vol. 87; No. 6; Art. No. 061912; 10.1063/1.2008374
• Xu, Donghua and Johnson, W. L. (2005) Geometric model for the critical-value problem of nucleation phenomena containing the size effect of nucleating agent; Physical Review B; Vol. 72; No. 5; Art. no. 052101; 10.1103/PhysRevB.72.052101
• Duan, Gang and Xu, Donghua, et el. (2005) Molecular dynamics study of the binary Cu_(46)Zr_(54) metallic glass motivated by experiments: Glass formation and atomic-level structure; Physical Review B; Vol. 71; No. 22; Art. No. 224208; 10.1103/PhysRevB.71.224208
• Fil, V. D. and Fil, D. V., et el. (2005) Surface pinning in an amorphous ZrTiCuNiBe alloy; Physical Review B; Vol. 71; No. 9; Art. No. 092504; 10.1103/PhysRevB.71.092504
• Bossuyt, Sven and Schroers, Jan, et el. (2005) Minimizing convection effects to measure diffusion in liquid droplets during high-temperature electrostatic levitation; Review of Scientific Instruments; Vol. 76; No. 3; Art. no. 033909; 10.1063/1.1866932
• Tang, X.-P. and Löffler, Jörg F., et el. (2005) Structural influence on atomic hopping and electronic states of Pd-based bulk metallic glasses; Applied Physics Letters; Vol. 86; No. 7; Art. No. 072104; 10.1063/1.1866217
• Duan, Gang and Xu, Donghua, et el. (2005) High copper content bulk glass formation in bimetallic Cu-Hf system; Metallurgical and Material Transactions A; Vol. 36; No. 2; 455-458; 10.1007/s11661-005-0316-8
• Mukherjee, S. and Schroers, J., et el. (2005) Influence of Kinetic and Thermodynamic Factors on the Glass-Forming Ability of Zirconium-Based Bulk Amorphous Alloys; Physical Review Letters; Vol. 94; No. 24; Art. no. 245501; 10.1103/PhysRevLett.94.245501
• Mukherjee, S. and Johnson, W. L., et el. (2005) Noncontact measurement of high-temperature surface tension and viscosity of bulk metallic glass-forming alloys using the drop oscillation technique; Applied Physics Letters; Vol. 86; No. 1; Art. no. 014104; 10.1063/1.1844596
• Schroers, Jan and Johnson, William L. (2004) Ductile Bulk Metallic Glass; Physical Review B; Vol. 93; No. 25; Art. No. 255506; 10.1103/PhysRevLett.93.255506
• Schroers, Jan and Veazey, Chris, et el. (2004) Synthesis method for amorphous metallic foam; Journal of Applied Physics; Vol. 96; No. 12; 7723-7730; 10.1063/1.1818355
• Schroers, Jan and Bossuyt, Sven, et el. (2004) Enhanced temperature uniformity by tetrahedral laser heating; Review of Scientific Instruments; Vol. 75; No. 11; 4523-4527; 10.1063/1.1804351
• Xu, Donghua and Duan, Gang, et el. (2004) Formation and properties of new Ni-based amorphous alloys with critical casting thickness up to 5 mm; Acta Materialia; Vol. 52; No. 12; 3493-3497; 10.1016/j.actamat.2004.04.001
• Xu, Donghua and Duan, Gang, et el. (2004) Unusual Glass-Forming Ability of Bulk Amorphous Alloys Based on Ordinary Metal Copper; Physical Review Letters; Vol. 92; No. 24; Art. no. 245504; 10.1103/PhysRevLett.92.245504
• Mukherjee, S. and Zhou, Z., et el. (2004) Overheating threshold and its effect on time–temperature-transformation diagrams of zirconium based bulk metallic glasses; Applied Physics Letters; Vol. 84; No. 24; 5010-5012; 10.1063/1.1763219
• Schroers, Jan and Johnson, William L. (2004) Highly processable bulk metallic glass-forming alloys in the Pt–Co–Ni–Cu–P system; Applied Physics Letters; Vol. 84; No. 18; 3666-3668; 10.1063/1.1738945
• Xu, Donghua and Lohwongwatana, Boonrat, et el. (2004) Bulk metallic glass formation in binary Cu-rich alloy series – Cu100−xZrx (x=34, 36, 38.2, 40 at.%) and mechanical properties of bulk Cu64Zr36 glass; Acta Materialia; Vol. 52; No. 9; 2621-2624; 10.1016/j.actamat.2004.02.009
• Demetriou, Marios D. and Johnson, Wiliam L. (2004) Modeling the transient flow of undercooled glass-forming liquids; Journal of Applied Physics; Vol. 95; No. 5; 2857-2865; 10.1063/1.1645669
• Lee, Hyon-Jee and Çağin, Tahir, et el. (2003) Criteria for formation of metallic glasses: The role of atomic size ratio; Journal of Chemical Physics; Vol. 119; No. 18; 9858-9870; 10.1063/1.1615494
• Conner, R. D. and Johnson, W. L., et el. (2003) Shear bands and cracking of metallic glass plates in bending; Journal of Applied Physics; Vol. 94; No. 2; 904-911; 10.1063/1.1582555
• Waniuk, Theodore and Schroers, Jan, et el. (2003) Timescales of crystallization and viscous flow of the bulk glass-forming Zr-Ti-Ni-Cu-Be alloys; Physical Review B; Vol. 67; No. 18; Art. No. 184203; 10.1103/PhysRevB.67.184203
• Schroers, Jan and Veazey, Chris, et el. (2003) Amorphous metallic foam; Applied Physics Letters; Vol. 82; No. 3; 370-372; 10.1063/1.1537514
• Schroers, Jan and Johnson, William L. (2002) Extremely low critical cooling rate measured on dispersed Pd43Ni10Cu27P20; Applied Physics Letters; Vol. 80; No. 12; 2069-2071; 10.1063/1.1462861
• Choi-Yim, Haein and Schroers, Jan, et el. (2002) Microstructures and mechanical properties of tungsten wire/particle reinforced Zr57Nb5Al10Cu15.4Ni12.6 metallic glass matrix composites; Applied Physics Letters; Vol. 80; No. 11; 1906-1908; 10.1063/1.1459766
• Johnson, W. L. (2002) Bulk amorphous metal—An emerging engineering material; JOM - Journal of the Minerals, Metals and Materials Society; Vol. 54; No. 3; 40-43; 10.1007/bf02822619
• Hays, C. C. and Schroers, J., et el. (2001) Vitrification and determination of the crystallization time scales of the bulk-metallic-glass-forming liquid Zr58.5Nb2.8Cu15.6Ni12.8Al10.3; Applied Physics Letters; Vol. 79; No. 11; 1605-1607; 10.1063/1.1398605
• Kim, C. P. and Busch, R., et el. (2001) Processing of carbon-fiber-reinforced Zr41.2Ti13.8Cu12.5Ni10.0Be22.5 bulk metallic glass composites; Applied Physics Letters; Vol. 79; No. 10; 1456-1458; 10.1063/1.1390317
• Pekarskaya, E. and Kim, C. P., et el. (2001) In situ transmission electron microscopy studies of shear bands in a bulk metallic glass based composite; Journal of Materials Research; Vol. 16; No. 9; 2513-2518
• Qi, Yue and Çağin, Tahir, et el. (2001) Melting and crystallization in Ni nanoclusters: The mesoscale regime; Journal of Chemical Physics; Vol. 115; No. 1; 385-394; 10.1063/1.1373664
• Schennach, R. and Grady, T., et el. (2001) Electrochemical characterization and surface analysis of bulk amorphous alloys in aqueous solutions at different pH; Journal of Vacuum Science and Technology A; Vol. 19; No. 4; 1447-1453; 10.1116/1.1380719
• Waniuk, Theodore A. and Schroers, Jan, et el. (2001) Critical cooling rate and thermal stability of Zr–Ti–Cu–Ni–Be alloys; Applied Physics Letters; Vol. 78; No. 9; 1213-1215; 10.1063/1.1350624
• Glade, S. C. and Löffler, J. F., et el. (2001) Crystallization of amorphous Cu47-Ti34-Zr11-Ni8; Journal of Applied Physics; Vol. 89; No. 3; 1573-1579; 10.1063/1.1332089
• Bezuglyi, E. V. and Gaiduk, A. L., et el. (2000) Electron renormalization of sound interaction with two-level systems in superconducting metallic glasses; Physical Review B; Vol. 62; No. 10; 6656-6664; 10.1103/PhysRevB.62.6656
• Bengus, V. Z. and Tabachnikova, E. D., et el. (2000) New features of the low temperature ductile shear failure observed in bulk amorphous alloys; Journal of Materials Science; Vol. 35; No. 17; 4449-4457; 10.1023/a:1004881612750
• Schroers, Jan and Johnson, William L., et el. (2000) Crystallization kinetics of the bulk-glass-forming Pd43Ni10Cu27P20 melt; Applied Physics Letters; Vol. 77; No. 8; 1158-1160; 10.1063/1.1289033
• Löffler, Jörg F. and Schroers, Jan, et el. (2000) Time–temperature–transformation diagram and microstructures of bulk glass forming Pd40Cu30Ni10P20; Applied Physics Letters; Vol. 77; No. 5; 681-683; 10.1063/1.127084
• Schroers, Jan and Samwer, Konrad, et el. (2000) Characterization of the interface between the bulk glass forming alloy Zr_(41)Ti_(14)Cu_(12)Ni_(10)Be_(23) with pure metals and ceramics; Journal of Materials Research; Vol. 15; No. 7; 1617-1621; 10.1557/JMR.2000.0232
• Schroers, Jan and Johnson, William L. (2000) History dependent crystallization of Zr41Ti14Cu12Ni10Be23 melts; Journal of Applied Physics; Vol. 88; No. 1; 44-48; 10.1063/1.373621
• Löffler, Jörg F. and Thiyagarajan, P., et el. (2000) Concentration and temperature dependence of decomposition in supercooled liquid alloys; Journal of Applied Crystallography; Vol. 33; No. 3; 500-503; 10.1107/S0021889899014867
• Glade, S. C. and Busch, R., et el. (2000) Thermodynamics of Cu47Ti34Zr11Ni8, Zr52.5Cu17.9Ni14.6Al10Ti5 and Zr57Cu15.4Ni12.6Al10Nb5 bulk metallic glass forming alloys; Journal of Applied Physics; Vol. 87; No. 10; 7242-7248; 10.1063/1.372975
• Glade, S. C. and Busch, R., et el. (2000) Thermodynamics of Cu_(47)Ti_(34)Zr_(11)Ni_8, Zr_(52.5)Cu_(17.9)Ni_(14.6)Al_(10)Ti_5 and Zr_(57)Cu_(15.4)Ni_(12.6)Al_(10)Nb_5 bulk metallic glass forming alloys; Journal of Applied Physics; Vol. 87; No. 10; 7242-7248; 10.1063/1.372975
• Glade, S. C. and Johnson, W. L. (2000) Viscous flow of the Cu47-Ti34-Zr11-Ni8 glass forming alloy; Journal of Applied Physics; Vol. 87; No. 10; 7249-7251; 10.1063/1.373411
• Schroers, Jan and Johnson, William L., et el. (2000) Repeated crystallization in undercooled Zr41Ti14Cu12Ni10Be23 liquids; Applied Physics Letters; Vol. 76; No. 17; 2343-2345; 10.1063/1.126340
• Hays, C. C. and Kim, C. P., et el. (2000) Microstructure Controlled Shear Band Pattern Formation and Enhanced Plasticity of Bulk Metallic Glasses Containing in situ Formed Ductile Phase Dendrite Dispersions; Physical Review Letters; Vol. 84; No. 13; 2901-2904; 10.1103/PhysRevLett.84.2901
• Bezuglyi, E. V. and Gaiduk, A. L., et el. (1999) Sound attenuation in the superconducting amorphous alloy ZrTiCuNiBe; Low Temperature Physics; Vol. 25; No. 12; 999-1002; 10.1063/1.593855
• Schroers, Jan and Masuhr, Andreas, et el. (1999) Pronounced asymmetry in the crystallization behavior during constant heating and cooling of a bulk metallic glass-forming liquid; Physical Review B; Vol. 60; No. 17; 11855-11858; 10.1103/PhysRevB.60.11855
• Tang, X.-P. and Geyer, Ulrich, et el. (1999) Diffusion mechanisms in metallic supercooled liquids and glasses; Nature; Vol. 402; No. 6758; 160-162; 10.1038/45996
• Johnson, William L. (1999) Bulk Glass-Forming Metallic Alloys: Science and Technology; MRS Bulletin; Vol. 24; No. 10; 42-56; 10.1557/s0883769400053252
• Hays, C. C. and Kim, C. P., et el. (1999) Large supercooled liquid region and phase separation in the Zr–Ti–Ni–Cu–Be bulk metallic glasses; Applied Physics Letters; Vol. 75; No. 8; 1089-1091; 10.1063/1.124606
• Conner, R. D. and Choi-Yim, H., et el. (1999) Mechanical properties of Zr_(57)Nb_5Al_(10)Cu_(15.4)Ni_(12.6) metallic glass matrix particulate composites; Journal of Materials Research; Vol. 14; No. 8; 3292-3297; 10.1557/JMR.1999.0445
• Schroers, J. and Busch, R., et el. (1999) Continuous refinement of the microstructure during crystallization of supercooled Zr41Ti14Cu12Ni10Be23 melts; Applied Physics Letters; Vol. 74; No. 19; 2806-2808; 10.1063/1.124020
• Liu, W. and Johnson, W. L., et el. (1999) Small-angle x-ray-scattering study of phase separation and crystallization in the bulk amorphous Mg62Cu25Y10Li3 alloy; Physical Review B; Vol. 59; No. 18; 11755-11759; 10.1103/PhysRevB.59.11755
• Ikeda, Hideyuki and Qi, Yue, et el. (1999) Strain Rate Induced Amorphization in Metallic Nanowires; Physical Review Letters; Vol. 82; No. 14; 2900-2903; 10.1103/PhysRevLett.82.2900
• Masuhr, A. and Waniuk, T. A., et el. (1999) Time Scales for Viscous Flow, Atomic Transport, and Crystallization in the Liquid and Supercooled Liquid States of Zr41.2Ti13.8Cu12.5Ni10.0Be22.5; Physical Review Letters; Vol. 82; No. 11; 2290-2293; 10.1103/PhysRevLett.82.2290
• Samwer, K. and Busch, R., et el. (1999) Change of Compressiblity at the Glass Transition and Prigogine-Defay Ratio in ZrTiCuNiBe Alloys; Physical Review Letters; Vol. 82; No. 3; 580-583; 10.1103/PhysRevLett.82.580
• Tang, X.-P. and Busch, Ralf, et el. (1998) Slow Atomic Motion in Zr-Ti-Cu-Ni-Be Metallic Glasses Studied by NMR; Physical Review Letters; Vol. 81; No. 24; 5358-5361; 10.1103/PhysRevLett.81.5358
• Dandliker, R. B. and Conner, R. D., et el. (1998) Melt infiltration casting of bulk metallic-glass matrix composites; Journal of Materials Research; Vol. 13; No. 10; 2896-2901; 10.1557/JMR.1998.0396
• Choi-Yim, H. and Busch, R., et el. (1998) The effect of silicon on the glass forming ability of the Cu47Ti34Zr11Ni8 bulk metallic glass forming alloy during processing of composites; Journal of Applied Physics; Vol. 83; No. 12; 7993-7997; 10.1063/1.367981
• Busch, R. and Johnson, W. L. (1998) The kinetic glass transition of the Zr46.75Ti8.25Cu7.5Ni10Be27.5 bulk metallic glass former-supercooled liquids on a long time scale; Applied Physics Letters; Vol. 72; No. 21; 2695-2697; 10.1063/1.121102
• Busch, R. and Liu, W., et el. (1998) Thermodynamics and kinetics of the Mg65Cu25Y10 bulk metallic glass forming liquid; Journal of Applied Physics; Vol. 83; No. 8; 4134-4141; 10.1063/1.367167
• Choi-Yim, H. and Johnson, W. L. (1997) Bulk metallic glass matrix composites; Applied Physics Letters; Vol. 71; No. 26; 3808-3810; 10.1063/1.120512
• Gaiduk, A. L. and Bezuglyi, E. V., et el. (1997) Low-temperature acoustic characteristics of the amorphous alloy Zr41.2Ti13.8Cu12.5Ni10Be22.5; Low Temperature Physics; Vol. 23; No. 10; 857-860; 10.1063/1.593459
• Gilbert, C. J. and Ritchie, R. O., et el. (1997) Fracture toughness and fatigue-crack propagation in a Zr–Ti–Ni–Cu–Be bulk metallic glass; Applied Physics Letters; Vol. 71; No. 4; 476-478; 10.1063/1.119610
• Ohsaka, K. and Chung, S. K., et el. (1997) Specific volumes of the Zr41.2Ti13.8Cu12.5Ni10.0Be22.5 alloy in the liquid, glass, and crystalline states; Applied Physics Letters; Vol. 70; No. 6; 726-728; 10.1063/1.118250
• Wunderlich, R. K. and Lee, D. S., et el. (1997) Noncontact modulation calorimetry of metallic liquids in low Earth orbit; Physical Review B; Vol. 55; No. 1; 26-29; 10.1103/PhysRevB.55.26
• Sun, X. and Schneider, S., et el. (1996) Oxidation and crystallization of an amorphous Zr60Al15Ni25 alloy; Journal of Materials Research; Vol. 11; No. 11; 2738-2743
• Geyer, U. and Johnson, W. L., et el. (1996) Small atom diffusion and breakdown of the Stokes–Einstein relation in the supercooled liquid state of the Zr46.7Ti8.3Cu7.5Ni10Be27.5 alloy; Applied Physics Letters; Vol. 69; No. 17; 2492-2494; 10.1063/1.117716
• Liu, Wenshan and Johnson, W. L. (1996) Precipitation of bcc nanocrystals in bulk Mg–Cu–Y amorphous alloys; Journal of Materials Research; Vol. 11; No. 9; 2388-2392; 10.1557/JMR.1996.0302
• Miller, M. K. and Russell, K. F., et el. (1996) Characterization of Bulk Metallic Glasses with the Atom Probe; Journal de Physique IV (Proceedings); Vol. 6; No. C5; 217-222; 10.1051/jp4:1996535
• Qiu, Yuanxun and Geyer, U., et el. (1996) Investigation of beryllium diffusion in the supercooled liquid and glassy states of the amorphous alloy Zr_(41.2)Ti_(13.8)Cu_(12.5)Ni_(10)Be_(22.5) by high energy helium elastic backscattering; Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms; Vol. 117; No. 1-2; 151-155; 10.1016/0168-583X(96)00218-2
• LaMadrid, M. A. and O'Connor, S. D., et el. (1996) Surface microstructure of Zr41.25Ti13.75Cu12.5Ni10.0Be22.5, a bulk metallic glass; Journal of Materials Research; Vol. 11; No. 6; 1494-1499
• Busch, R. and Bakke, E., et el. (1996) Supercooled melting in multicomponent Zr–Al–Cu–Ni diffusion couples; Applied Physics Letters; Vol. 68; No. 21; 2945-2947; 10.1063/1.116363
• Kim, Y. J. and Busch, R., et el. (1996) Experimental determination of a time–temperature-transformation diagram of the undercooled Zr41.2Ti13.8Cu12.5Ni10.0Be22.5 alloy using the containerless electrostatic levitation processing technique; Applied Physics Letters; Vol. 68; No. 18; 1057-1059; 10.1063/1.116247
• Bruck, H. A. and Rosakis, A. J., et el. (1996) The dynamic compressive behavior of beryllium bearing bulk metallic glasses; Journal of Materials Research; Vol. 11; No. 2; 503-511
• Schneider, S. and Thiyagarajan, P., et el. (1996) Formation of nanocrystals based on decomposition in the amorphous Zr41.2Ti13.8Cu12.5Ni10Be22.5 alloy; Applied Physics Letters; Vol. 68; No. 4; 493-495; 10.1063/1.116377
• Lin, X. H. and Johnson, W. L. (1995) Formation of Ti–Zr–Cu–Ni bulk metallic glasses; Journal of Applied Physics; Vol. 78; No. 11; 6514-6519; 10.1063/1.360537
• Bakke, E. and Busch, R., et el. (1995) The viscosity of the Zr46.75Ti8.25Cu7.5Ni10Be27.5 bulk metallic glass forming alloy in the supercooled liquid; Applied Physics Letters; Vol. 67; No. 22; 3260-3262; 10.1063/1.114891
• Geyer, U. and Schneider, S., et el. (1995) Atomic diffusion in the supercooled liquid and glassy states of the Zr41.2Ti13.8Cu12.5Ni10Be22.5 alloy; Physical Review Letters; Vol. 75; No. 12; 2364-2367; 10.1103/PhysRevLett.75.2364
• Busch, R. and Schneider, S., et el. (1995) Decomposition and primary crystallization in undercooled Zr41.2Ti13.8Cu12.5Ni10.0Be22.5 melts; Applied Physics Letters; Vol. 67; No. 11; 1544-1546; 10.1063/1.114487
• Busch, R. and Kim, Y. J., et el. (1995) Hemispherical total emissivity and specific heat capacity of deeply undercooled Zr41.2Ti13.8Cu12.5Ni10.0Be22.5 melts; Applied Physics Letters; Vol. 66; No. 23; 3111-3113; 10.1063/1.113619
• Busch, R. and Kim, Y. J., et el. (1995) Thermodynamics and kinetics of the undercooled liquid and the glass transition of the Zr41.2Ti13.8Cu12.5Ni10.0Be22.5 alloy; Journal of Applied Physics; Vol. 77; No. 8; 4039-4043; 10.1063/1.359485
• Kim, Y. J. and Busch, R., et el. (1994) Metallic glass formation in highly undercooled Zr41.2Ti13.8Cu12.5Ni10.0Be22.5 during containerless electrostatic levitation processing; Applied Physics Letters; Vol. 65; No. 17; 2136-2138; 10.1063/1.112768
• Peker, A. and Johnson, W.L. (1993) A highly processable metallic glass: Zr41.2Ti13.8Cu12.5Ni10.0Be22.5; Applied Physics Letters; Vol. 63; No. 17; 2342-2344; 10.1063/1.110520
• Krill, C. E., III and Li, J., et el. (1993) Search for instability-induced amorphization in deuterated ErFe2; Physical Review B; Vol. 48; No. 6; 3689-3697; 10.1103/PhysRevB.48.3689
• Ohsaka, K. and Trinh, E. R., et el. (1993) Gibbs free-energy difference between the glass and crystalline phases of a Ni-Zr alloy; Applied Physics Letters; Vol. 62; No. 19; 2319-2321; 10.1063/1.109404
• Eckert, J. and Holzer, J. C., et el. (1993) Mechanically driven alloying and grain size changes in nanocrystalline Fe-Cu powders; Journal of Applied Physics; Vol. 73; No. 6; 2794-2802; 10.1063/1.353055
• Eckert, J. and Holzer, J. C., et el. (1993) Thermal stability and grain growth behavior of mechanically alloyed nanocrystalline Fe-Cu alloys; Journal of Applied Physics; Vol. 73; No. 1; 131-141; 10.1063/1.353890
• Ohsaka, K. and Trinh, E. H., et el. (1992) Gibbs free energy difference between the undercooled liquid and the beta-phase of a Ti-Cr alloy; Applied Physics Letters; Vol. 60; No. 9; 1079-1081; 10.1063/1.106450
• Kittl, J. A. and Johnson, W. L., et el. (1991) Lattice distortions in YBa2Cu3O7–delta thin films grown in situ by sequential ion beam sputtering; Journal of Applied Physics; Vol. 69; No. 9; 6710-6712; 10.1063/1.348892
• Fecht, H. J. and Johnson, W. L. (1991) A conceptual approach for noncontact calorimetry in space; Review of Scientific Instruments; Vol. 62; No. 5; 1299-1303; 10.1063/1.1142488
• Fecht, H. J. and Perepezko, J. H., et el. (1990) Thermodynamic properties and crystallization kinetics of glass-forming undercooled liquid Au-Pb-Sb alloys; Journal of Applied Physics; Vol. 68; No. 9; 4494-4502; 10.1063/1.346200
• Kittl, J. A. and Nieh, C. W., et el. (1990) Correlations between deposition parameters and structural and electrical properties of YBa2Cu3O7–delta thin films grown in situ by sequential ion beam sputtering; Applied Physics Letters; Vol. 56; No. 24; 2468-2470; 10.1063/1.103258
• Fecht, H. J. and Fu, Z., et el. (1990) Specific-heat anomaly during vitrification of hydrided Fe2Er single crystals; Physical Review Letters; Vol. 64; No. 15; 1753-1756; 10.1103/PhysRevLett.64.1753
• Fecht, H. J. and Han, G., et el. (1990) Metastable phase formation in the Zr-Al binary system induced by mechanical alloying; Journal of Applied Physics; Vol. 67; No. 4; 1744-1748; 10.1063/1.345624
• Ma, E. and Workman, T. W., et el. (1989) Ion mixing of metal/Al bilayers near 77 K; Applied Physics Letters; Vol. 54; No. 5; 413-415; 10.1063/1.100937
• Hellstern, E. and Fecht, H. J., et el. (1989) Structural and thermodynamic properties of heavily mechanically deformed Ru and AlRu; Journal of Applied Physics; Vol. 65; No. 1; 305-310; 10.1063/1.342541
• Johnson, R. W. and Johnson, W. L. (1988) X-ray diffractometer stage for in situ structural analysis of thin films; Review of Scientific Instruments; Vol. 59; No. 12; 2568-2572; 10.1063/1.1139899
• Ma, W. and Meng, W. J., et el. (1988) Simultaneous planar growth of amorphous and crystalline Ni silicides; Applied Physics Letters; Vol. 53; No. 21; 2033-2035; 10.1063/1.100494
• Clemens, B. M. and Nieh, C. W., et el. (1988) Nucleation and growth of YBaCuO on SrTiO3; Applied Physics Letters; Vol. 53; No. 19; 1871-1873; 10.1063/1.100484
• Cotts, E. J. and Wong, G. C., et el. (1988) Calorimetric observations of amorphous and crystalline Ni-Zr alloy formation by solid-state reaction; Physical Review B; Vol. 37; No. 15; 9049-9052; 10.1103/PhysRevB.37.9049
• Meng, W. J. and Nieh, C. W., et el. (1987) Maximum thickness of amorphous NiZr interlayers formed by a solid-state reaction technique; Applied Physics Letters; Vol. 51; No. 21; 1693-1695; 10.1063/1.98546
• Meng, W. J. and Fultz, B., et el. (1987) Solid-state interdiffusion reactions in Ni/Ti and Ni/Zr multilayered thin films; Applied Physics Letters; Vol. 51; No. 9; 661-663; 10.1063/1.98326
• Workman, T. W. and Cheng, Y. T., et el. (1987) Effect of thermodynamics on ion mixing; Applied Physics Letters; Vol. 50; No. 21; 1485-1487; 10.1063/1.98253
• Cheng, Y.-T. and Nicolet, M.-A., et el. (1987) From cascade to spike — a fractal-geometry approach; Physical Review Letters; Vol. 58; No. 20; 2083-2086; 10.1103/PhysRevLett.58.2083
• Cheng, Yang-Tse and Johnson, William L. (1987) Disordered Materials: A Survey of Amorphous Solids; Science; Vol. 235; No. 4792; 997-1002; 10.1126/science.235.4792.997
• Delgado, R. and Armbrüster, H., et el. (1986) Electron transport in La100-xAlx metallic glasses; Physical Review B; Vol. 34; No. 12; 8288-8295; 10.1103/PhysRevB.34.8288
• Cotts, E. J. and Meng, W. J., et el. (1986) Calorimetric study of amorphization in planar, binary, multilayer, thin-film diffusion couples of Ni and Zr; Physical Review Letters; Vol. 57; No. 18; 2295-2298; 10.1103/PhysRevLett.57.2295
• Cheng, Y.-T. and Zhao, X.-A., et el. (1986) Correlation between the cohesive energy and the onset of radiation-enhanced diffusion in ion mixing; Journal of Applied Physics; Vol. 60; No. 7; 2615-2617; 10.1063/1.337131
• Politis, C. and Johnson, W. L. (1986) Preparation of amorphous Ti1−xCux (0.10<x<=0.87) by mechanical alloying; Journal of Applied Physics; Vol. 60; No. 3; 1147-1151; 10.1063/1.337359
• Wright, A. C. and Hannon, A. C., et el. (1985) A Neutron Diffraction Investigation of the Atomic and Magnetic Structure of Amorphous Dy₇Ni₃; Journal de Physique Colloques; Vol. 46; No. C8; 299-303; 10.1051/jphyscol:1985844
• Thakoor, A. P. and Lamb, J. L., et el. (1985) Refractory amorphous metallic (W0.6Re0.4)76B24 coatings on steel substrates; Journal of Applied Physics; Vol. 58; No. 9; 3409-3414; 10.1063/1.336295
• Cheng, Y.-T. and Johnson, W. L., et el. (1985) Dominant moving species in the formation of amorphous NiZr by solid-state reaction; Applied Physics Letters; Vol. 47; No. 6; 800-802; 10.1063/1.95988
• Schulz, Robert and Mehra, Madhav, et el. (1985) Electrical resistivity and structural changes upon relaxation and crystallisation of (Mo_(0.6)Ru_(0.4))_(100-x)B_x metallic glasses; Journal of Physics F: Metal Physics; Vol. 15; No. 10; 2109-2120; 10.1088/0305-4608/15/10/007
• Tenhover, M. and Lukco, D., et el. (1985) Electronic structure of amorphous Mo-Ru-Si alloys; Journal of Applied Physics; Vol. 57; No. 1; 3200-3202; 10.1063/1.335149
• Van Rossum, M. and Cheng, Y-T., et el. (1985) Correlation between cohesive energy and mixing rate in ion mixing of metallic bilayers; Applied Physics Letters; Vol. 46; No. 6; 610-612; 10.1063/1.95557
• Schulz, Robert and Matijasevic, V., et el. (1984) Early stage of crystallization of (Zr1-xHfx)62Ni38 metallic glasses; Physical Review B; Vol. 30; No. 12; 6856-6865; 10.1103/PhysRevB.30.6856
• Atzmon, Michael and Verhoeven, John D., et el. (1984) Formation and growth of amorphous phases by solid-state reaction in elemental composites prepared by cold working; Applied Physics Letters; Vol. 45; No. 10; 1052-1053; 10.1063/1.95064
• Cheng, Y-T. and Van Rossum, M., et el. (1984) Influence of chemical driving forces in ion mixing of metallic bilayers; Applied Physics Letters; Vol. 45; No. 2; 185-187; 10.1063/1.95163
• Van Rossum, M. and Nicolet, M-A., et el. (1984) Amorphization of Hf-Ni films by solid-state reaction; Physical Review B; Vol. 29; No. 10; 5498-5504; 10.1103/PhysRevB.29.5498
• Samwer, K. and Johnson, W. L. (1983) Structure of glassy early-transition-metal-late-transition-metal hydrides; Physical Review B; Vol. 28; No. 6; 2907-2913; 10.1103/PhysRevB.28.2907
• Schwarz, R. B. and Johnson, W. L. (1983) Formation of an amorphous alloy by solid-state reaction of the pure polycrystalline metals; Physical Review Letters; Vol. 51; No. 5; 415-418; 10.1103/PhysRevLett.51.415
• Johnson, W. L. and Lee, Mark C. (1983) The use of metallic glasses in fabrication of ICF targets; Journal of Vacuum Science and Technology A; Vol. 1; No. 3; 1568-1570; 10.1116/1.572266
• Liu, B. X. and Clemens, B. M., et el. (1983) Ion mixing to produce amorphous Mo-Ru superconducting films; Applied Physics Letters; Vol. 42; No. 7; 624-626; 10.1063/1.94002
• Yeh, X. L. and Samwer, K., et el. (1983) Formation of an amorphous metallic hydride by reaction of hydrogen with crystalline intermetallic compounds — A new method of synthesizing metallic glasses; Applied Physics Letters; Vol. 42; No. 3; 242-244; 10.1063/1.93901
• Tenhover, M. and Johnson, W. L. (1983) Superconductivity and the electronic structure of Zr- and Hf-based metallic glasses; Physical Review B; Vol. 27; No. 3; 1610-1618; 10.1103/PhysRevB.27.1610
• Liu, Bai-Xin and Johnson, W. L., et el. (1983) Structural difference rule for amorphous alloy formation by ion mixing; Applied Physics Letters; Vol. 42; No. 1; 45-47; 10.1063/1.93767
• Clemens, B. M. and Johnson, W. L. (1982) Surface flux pinning in superconducting amorphous (Mo0.6Ru0.4)B18; Journal of Applied Physics; Vol. 53; No. 11; 7612-7614; 10.1063/1.330135
• Williams, Arthur and Mehra, Madhav, et el. (1982) The structure and properties of some Rh_(0.92-x)B_xSi_(0.08) metallic glasses; Journal of Physics F: Metal Physics; Vol. 12; No. 9; 1861-1868; 10.1088/0305-4608/12/9/008
• Kim, C. O. and Johnson, W. L. (1981) Amorphous phase separation in the metallic glasses (Pb1-ySby)1-xAu; Physical Review B; Vol. 23; No. 1; 143-149; 10.1103/PhysRevB.23.143
• Johnson, W. L. (1980) Superconductivity in Metallic Glasses; Journal de Physique Colloques; Vol. 41; No. C8; 731-741; 10.1051/jphyscol:19808183
• Panissod, P. and Aliaga Guerra, D., et el. (1980) Local symmetry around the glass-former sites in amorphous metallic alloys through electric quadrupole effects; Physical Review Letters; Vol. 44; No. 22; 1465-1468; 10.1103/PhysRevLett.44.1465
• Colter, P. C. and Adair, T. W., et el. (1978) Hall Effect in Amorphous La_(0.8)Ga_(0.2); Journal de Physique Colloques; Vol. 39; No. C6; 955-956; 10.1051/jphyscol:19786423
• Poon, S. J. and Johnson, W. L. (1978) Electronic and Transport Properties of Liquid Quenched Amorphous (Mo_(1-xx)Ru_x)₈₀P₂₀ Superconductors; Journal de Physique Colloques; Vol. 39; No. C6; 451-453; 10.1051/jphyscol:19786202
• Johnson, W. L. and Poon, S. K., et el. (1978) Superconductivity, magnetic susceptibility, and electronic properties of amorphous (Mo1-xRux)80P20 alloys obtained by liquid quenching; Physical Review B; Vol. 18; No. 1; 206-217; 10.1103/PhysRevB.18.206
• Johnson, W. L. and Poon, S. J. (1975) Enhanced superconductivity and lattice instability in Nb-Rh alloys; Journal of Applied Physics; Vol. 46; No. 5; 2325-2326; 10.1063/1.321837
• Johnson, W. L. and Poon, S. J. (1975) Superconductivity in amorphous and microcrystalline transition–metal alloys; Journal of Applied Physics; Vol. 46; No. 4; 1787-1792; 10.1063/1.321784
• Johnson, W. L. and Poon, S. J. (1975) Properties of amorphous and microcrystalline superconductors; IEEE Transactions on Magnetics; Vol. 11; No. 2; 189-191; 10.1109/TMAG.1975.1058645
• Johnson, W. L. and Poon, S. J., et el. (1975) Amorphous superconducting lanthanum-gold alloys obtained by liquid quenching; Physical Review B; Vol. 11; No. 1; 150-154; 10.1103/PhysRevB.11.150
• Tsuei, C. C. and Johnson, W. L. (1974) Superconductivity in metal-semiconductor eutectic alloys; Physical Review B; Vol. 9; No. 11; 4742-4751; 10.1103/PhysRevB.9.4742
• Reese, W. and Johnson, W. L. (1970) Low-temperature specific heat of ruthenium; Physical Review B; Vol. 2; No. 8; 2972-2974; 10.1103/PhysRevB.2.2972
• Johnson, W. L. and Reese, W. (1970) Calorimetric investigation of the antiferromagnetic transition in NiCl2·6H2O; Physical Review B; Vol. 2; No. 5; 1355-1362; 10.1103/PhysRevB.2.1355